Mantis-RS PRO license plate holder Reflector e-approved, universal

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от Mon Aug 30 2021 01:10:14 GMT+0500 (YEKT)

  Mantis-RS PRO license plate holder Reflector e-approved, universal

  Why does it actually need a different number plate holder? Probably for "cosmetic" or visual reasons. Whatever the case, the LSL *MANTIS-RS PRO* licence plate holder is exactly what you are looking for. Because in terms of design, it adapts perfectly to the lines of your bike.
  The universal LSL *MANTIS-RS PRO* holder can be mounted exactly at the original attachment points of your motorbike. For you, this means: only exchange - no drilling or cutting. The licence plate is made of sheet steel, 2 mm thick and powder-coated. This *PRO* version includes the very small LSL number plate light milled from high-quality aluminium with mounting plate and support arm.

  • universal bracket
  • suitable for European number plates
  • infinitely adjustable angle of inclination
  • steplessly adjustable indicator holder
  • slotted indicator holder for quick mounting without cable separation
  • Continuously adjustable reflector
  • simple fixing without further work steps (e.g. drilling)
  • Easy mounting of the number plate through slotted holes
  • licence plate light incl. holder included in delivery
  • Steplessly adjustable licence plate light
  • Many different options for mounting the licence plate light
  • E-approved

  
  Scope of delivery:
  1 x LSL *MANTIS-RS PRO* licence plate holder with licence plate light for various vehicles.
  1 x LSL *MANTIS-RS PRO* licence plate holder
  Indicator holder
  1 x Reflector with adjustable holder
  Mounting parts
  Assembly instructions
  
  
  Notes:

  • if side reflectors are fitted to your original number plate holder, these must be refitted in a suitable position or replaced with new ones
  • to avoid damage to cables, all sharp-edged feed-throughs are protected by a rubber membrane grommet
  • stepless adjustment: this allows you to adjust the plate to the desired position without drilling. To keep the plate in this position, there is an additional securing screw
  • Two rubber washers are included to secure the plate and reduce vibrations. Another rubber buffer supports the number plate on its underside.
  • the indicator brackets of the LSL MANTIS-RS PRO are adjustable in width and therefore suitable for any type of accessory indicator. This allows you to adjust the position of the turn signals to suit a wide range of licence plates.
  • The indicator holders are not suitable for original turn signals in most cases.
  • To enable the turn signals to be mounted without disconnecting them from the wiring harness, the 10 mm holes are slotted to the side
  • the bracket is adjustable in height and designed to allow mounting in the legally required position
  • you can also adjust the position of the rear reflector individually via a slider. Adaptation to the different designs of EU number plates is done in no time.

  
  

  Предложить перевод

Мы привозим на заказ из Германии.

Срок доставки примерно 2 месяца.

Наличие и цены на сайте актуальные.

Положите нужный товар в корзину - там все рассчитается автоматически.

Если у вас остались вопросы: