Revit Montana H2O, textile jacket waterproof

К сожалению, у нас нет точной информации, когда ожидаются поставки конкретных товаров. Лучше не добавлять в посылку отсутствующие товары, либо быть готовым ожидать неходовые товары несколько месяцев. Были случаи, что отсутствующие товары исключались из продажи.
Имеет смысл разделить посылки. Одна полностью укомплектованная, другая с отсутствующими товарами.

Чтобы после прихода на склад отсутствующий товар автоматически зарезервировался за Вами, необходимо оформить и оплатить его в заказе.

• Описание товара на английском от Mon Mar 06 2023 17:59:41 GMT+0500 (YEKT)

  
  
  

  Revit Montana H2O, textile jacket waterproof

  Article No.: 11077723

  The Montana H2O motorcycle jacket is the ideal garment for urban mobility and helps you to master everything that life offers you on your daily commute. Normally, hardly anyone would guess that it is a completely street-ready motorcycle jacket.

  Besides the long typical parkas that REV'IT! already offers for commuters, it was time to offer a shorter jacket as well. The Montana H2O is made of 2L PWR|Shell material and has a built-in hydratex|Mesh G-Liner membrane to keep the water out.

  To keep you protected, the Montana H2O is equipped with comfortable, lightweight and ventilated SEESMART Level 1 protectors on the elbows and shoulders. There's also a pocket for the optional SEESOFT Level 2 back protector if you want more security. The numerous waterproof pockets allow you to stash everything you need on your daily commute, regardless of the weather.

  Adjustment cords and tabs let you adjust the fit to your body, and the jeans loops or short connection zipper let you attach the jacket to motorcycle pants or jeans. Reflective elements on the back and on the detachable hood bring additional visibility.

  The removable thermal lining wraps you in warmth and luxury when riding on cold spring, fall and winter mornings. Without the liner, this motorcycle jacket is perfect for taking you safely and comfortably from spring to early fall.

  You'll look good and stay dry in the Montana H2O motorcycle jacket.

  Features

  • Made from 2L PWR|Shell
  • hydratex®|mesh G-Liner
  • Removable thermal lining
  • Removable hood
  • SEESMART Level 1 protectors
  • Drawcord for adjustment at the waist
  • Adjustment tab at the cuffs
  • Napoleon inner pocket
  • Sleeve pocket
  • Slit pocket on the chest
  • Three inside pockets
  • Two front pockets
  • Adjustable drawcord on hood
  • Jeans loop
  • Short connection zipper
  • Prepared for SEESOFT™ Level 2 back protector RV
  • SEESMART™ Level 1 elbow protectors RV34-L1-A
  • SEESMART™ Level 1 shoulder protectors RV34-L1-B
  • Reflective logo on the back
  • Laminated reflective material on hood
  • This garment is certified to EN 17092 standard, published in 2020, and meets protection standard A

  Removable hood

  The hood can be easily removed and reattached after the ride. It provides protection from the elements and helps keep your head nice and warm in bad weather.

  hydratex®|G liner

  This waterproof coating is applied to the inside of the lining, and the seams are sealed to ensure the garment is waterproof. The REV'IT! hydratex®|G-liner coating is used in the manufacture of products that require basic all-weather protection.

  hydratex|Lite waterproof membrane

  Waterproof membrane that provides all-weather protection with just a single layer. The outer shell has a waterproof coating on the inside that prevents rain and wind from penetrating. At the same time, the micropores allow sweat to escape to the outside. So you stay dry and warm, without unpleasant moisture.

  Removable thermal lining

  On mornings, evenings or whole days with low temperatures, the thermal lining provides warmth. The same applies to tours in the mountains: warm in the valley, thermal lining out. Cold on the pass, thermal lining in. This lining allows you to use the garment throughout different seasons. Taking it out or putting it back in is a matter of seconds.

  SEESMART™ Level 1 protectors

  SEESMART™ protectors offer maximum flexibility and still pass the impact tests according to Level 1 of EN1621-1:2012, both under normal and hot (T+) conditions

  Prepared for SEESOFT Level 2 back protector insert

  A simple upgrade for added protection. The prepared pockets are tailor-made to hold the SEESOFT™ protectors and give the motorcyclist extra safety on the road. They can be easily and quickly inserted and removed and do not interfere in the slightest while riding the motorcycle.

  
  

  Предложить перевод

Мы привозим на заказ из Германии.

Срок доставки примерно 2 месяца.

Наличие и цены на сайте актуальные.

Положите нужный товар в корзину - там все рассчитается автоматически.

Если у вас остались вопросы: